Bathroom radiators: three important factors

Bathrooms are often smaller than other rooms in the house, which makes clever design not only important but also a challenge. The radiator needs to provide warmth to the room, but it also needs to look beautiful.

Output

Any radiator’s primary role is to provide enough heat to warm up the room. So, the first thing you need to understand is how big the space is you’re trying to heat, and then to calculate the heat output required. Given that bathrooms are often wet, and that you want to be warm when you step out of the bath or shower, the general consensus is that the bathroom temperature should be slightly higher than the rest of the house, at about 24 °C. Insulation will help maintain the temperature and therefore make the radiator more efficient.

Aluminium

The modern option is aluminium and in many ways it is a better metal for use in bathrooms than iron or steel that has been used historically. It is resistant to rust, which is clearly a positive for use in a moist bathroom, and it is also lighter, so mounting it on a wall is a real possibility rather than having to take up valuable floor space. Aluminium will also conduct heat better, which means it heats faster and consequently requires less energy.

For expert advice on choosing aluminium radiators for your home, get in touch with specialist retailers like Apollo Radiators http://apolloradiators.co.uk/Category/3/header/3/radiator-ranges.

Towel radiators

Towel radiators are much more efficient today too, and as well as being able to dry wet towels, they can also heat a bathroom as well. If you would prefer, and for an added dash of luxury, combine a wall-mounted towel radiator with underfloor heating.

For more ideas on how to choose the perfect bathroom radiator, see the suggestions from Houzz.

Once you have worked out how to heat your bathroom, you can move on to planning the rest of the room and whether plumbing work is required. Beyond that, the fun really starts with the aesthetics and choosing the décor. Pick a colour scheme that works for you and your family. Blues and greens can be very relaxing, and are often used in bathrooms, though many prefer white and accent colours as white is associated with cleanliness, which is important in a bathroom.

Five more questions to ask your membership management system supplier

You’ve taken the plunge and decided to invest in membership management software for your organisation, but how should you go about choosing which system is best for you, and what should you ask potential suppliers?

Is it their own, or are they reselling someone else’s system?

Some software developers still write and sell bespoke, unique software packages for individual clients. For some membership businesses who have complex requirements, this may be exactly what you want and need. However, the ongoing costs of maintenance updates and bug fixes can be expensive.

Perhaps the supplier has taken an existing piece of off-the-shelf software and adapted it to suit a particular industry sector, such as membership management. There can be downsides to this scenario if the off-the-shelf software is developed and upgraded at a faster rate than the add-on.

Are you being offered an off-the-shelf dedicated piece of membership management software?

Be clear before you start what the supplier is actually offering you as it can have a huge impact on cost and development later down the line.

BCS, The Chartered Institute for IT, offers some useful information about the differences between bespoke and off-the-shelf software.

If you’re looking at membership management systems, companies like https://www.ofec.co.uk/web-and-software-development-services/membership-management-systems.aspx have nearly 20 years of experience in their field.

What’s covered in your contract?

Be certain that you know exactly what is included in your contract. Is it just the software and installation? What about data migration from another system or even paper records?

How will you be charged for your software?

More and more software houses are moving to a subscription model versus an up-front charge. This can make it much more cost-effective for most businesses and help to improve cashflow. However, for some organisations, paying up front will be a better option, so you should make sure this is possible.

What support can you expect?

What does the supplier offer, and does it come directly from them or a third party? Does it include on-site visits or just telephone support?

What about ongoing fees?

What else will you be charged for in the future? Are regular upgrades included, or will you have to either pay more further down the line or face being left with a system that is out of date?

The Rise of Rental Fraud

Tenants Are Conned into Paying Upfront

Rental fraud is a common occurrence and happens when prospective tenants are conned into paying a fee upfront to the landlord to rent a property.

Often the property will not even exist. Occasionally, it will have been already rented out to someone else. Unfortunately, the customer then loses the fee he or she has paid, and that person will also miss out on the dream property they had their hearts set on.

Conmen will often suck their victim or victims into the scam via online advertising. The adverts will appear genuine because realistic photos are used to illustrate the property on the website. Sometimes the victim will indeed visit the property to view in person, but most times the payment is handed over without prior viewing, which is a foolish move.

According to the UK’s national centre for fraud and online crime, Action Fraud in 429 cases prospective buyers reported losing £5,000 or more.

And between April 1 2014 and 31 March this year, a total of 18,645 rental fraud reports were made to Action Fraud, with victims losing almost £2,000 each.

The organisation sees a rise in reporting levels during July and August. This peak is generally due to prospective buyers looking for holiday accommodation. Alarmingly, holiday fraud accounts for around 27 per cent of all rental fraud reports during this period.

University Students Are Frequently Targeted

And once the new semester at university begins, conmen will make college students and undergraduates their targets. Fake lettings are renowned for springing up around this time, with the conmen cruelly taking advantage of the large number of young people desperate for housing.

There is plenty of Property Inventory Software on the market such as https://inventorybase.co.uk/. This is a data-gathering tool that enables renters to create property reports easily on their iPhone, Android or iPad. The app will then convert the data into a document that can be digitally signed by the tenant on-site.

Generally, there is a lot of advice online for prospective tenants. It’s important to be aware of the standard advice – never feel pressurised into signing and always do your homework by verifying references. It is also a good idea to check reviews. Most importantly, if it looks and sounds too good to be true, then it probably is.

Is the McLaren F1 Team Suffering from Gridlocked Leadership?

McLaren F1 has struggled to achieve much over the last couple of seasons. In 2017 it seemed that the problems might be to do with the switch to a Honda engine, but problems seem to continue into 2018 after the team changed again to a Renault engine.

In fact, in 2018, McLaren doesn’t come anywhere close to the top three positions in the Formula One constructors’ rankings.

So What Is Going On at McLaren?

The new boss, Zak Brown, believes that the problems stem from too many people being involved in every decision. That individuals within the organisation have no autonomy to make an informed decision without taking it to a committee. This slows everything down and means that changes can take months to be implemented.

While he feels that they’re in need of new blood in the team, he is also aware that there is a plethora of talent within the existing team that is being strangled by the complex structure and decision-making process. So while new people often bring with them fresh ideas, those of the existing team should also be allowed to flourish.

Hopefully, some of these changes will be able to be put in place quickly enough to affect results in the latter half of the season so they can at least leave the 2018 season on a high at the last race of the season in Abu Dhabi.

The Abu Dhabi Grand Prix

This race is the only one of the series to take place in twilight, and the changing light from daylight to darkness makes it a challenging race for drivers. In recent years the drivers’ championship has also been decided here.

These two factors make it an exhilarating event to attend for any F1 enthusiast. If you get the opportunity to go, it will certainly be a once-in-a-lifetime spectacle. Companies such as https://edgeglobalevents.com/f1-paddock-club/f1-paddock-club-abu-dhabi/ can arrange packages for you, including entrance to the exclusive F1 Paddock Club Abu Dhabi.

So as McLaren attempt to sort out their internal structure and wrangling, only time will tell if they’re able to make any improvements on a thus far dismal 2018 or whether they will have to wait for 2019. Zak Brown certainly hopes these changes will help to put McLaren back in pole position.

Do you need a vent or explosion suppression system?

One of the best ways of securing buildings that house potentially combustible equipment such as dryers and dust collectors is to provide safeguards for these through either explosion vents or suppression systems. Vents release the pressure from an explosion outside of the equipment, whereas suppression systems use suppressants such as chemicals to extinguish the fire.

The question is which should you choose for your vacuum conveyor? Vents as a whole are cheaper to install but are not suitable for all installations, making a suppression system the preferred choice. Let’s look at some examples of when a suppression system is better.

High K

K is the pressure created in an explosion. The higher the K the larger the vent needs to be, which in turn increases the overall cost. A suppression system is not affected by the value of K meaning if the value is high, it might be the less expensive option.

Space is limited

When there isn’t enough space to accommodate large vents for one reason or another, then a suppression system is the logical choice as it takes up minimal space.

Material is hazardous

If the material is moved through a vacuum conveyor and is in any way toxic or biologically active so it cannot be released into the atmosphere, explosion suppression is obviously the only choice.

There isn’t enough space to vent

By estimating the size of any possible explosion caused by the equipment you’ll be able to predict how much space could be affected around the equipment. The NFPA gives equations which allow you to estimate how far the flames of an explosion are likely to extend given the size of the equipment involved. One example shows that Vacuum Conveyors of 10 cubic metres can throw a flame for up to 17 metres out of a vent. If you don’t have 17 metres of space free, then you should opt for a suppression system.

Equipment is situated inside

Explosion vents work by rupturing which releases the pressure from an explosion outside the equipment. In order to protect people and equipment it is necessary that the vents discharge outdoors. As a result, ducting must be used to connect the vents with the outdoors. This ducting can add to overall costs, especially if the vented equipment is far from the building’s exterior walls.

How to get the most from your flexible duct

Flexible ducting is at the heart of your HVAC system, but it must be installed correctly. Most of the problems that people claim to encounter with this type of tubing stem from poor installation. Master that and your system will work like clockwork.

Common problems when installing ductwork

One of the most common problems with flexible duct is that installers don’t pull the inner lining tight. This simple step can significantly reduce the friction rate by reducing longitudinal compression. Leave the liner loose and you’ll experience a 15-30% rise in the friction rate.

You also need to make sure that the ductwork is adequately supported. Sagging ducts make it difficult to create really tight and solid connections between the liner and the connector. Always seal first with duct tape before securing with a plastic zip tie for best results.

Another issue is making the bends in the ducting too tight. Use another piece of high quality flexible ducting from a company like https://www.dustspares.co.uk/flexible-ducting/ as a guide when making your bends – they should fit snugly to a 90-degree angle but no tighter.

Tips for correct installation

Get it right and your ducting will be versatile, durable and long-lasting. It should be easy to install if you avoid the common installation problems and take your time.

Start by planning out where the piping has to go, remembering to add in regular support joints for an optimised installation. Keep the number of joins to a minimum and don’t situate any part of your ducting system too close to a heat source.

When installing, work from support joint to support joint, piece by piece, ensuring that joins make a really snug and tight fit. Don’t forget to pull out the inner sleeves to reduce friction throughout your system, so do this as you go.

To improve the airflow, ensure you have sufficient insulation which is vital to protect the ducts from extremes of temperature and constant heating and cooling of the airflow. Check for leaks and use a high-quality mastic around the joins if necessary. Also, check that there’s sufficient support and no overly tight bends that are inhibiting airflow.

Flexible ducting is cost-effective, easy to work with and ideal for tricky installations. Pay attention to the details when installing and you’ll find your HVAC system functions brilliantly.

Here’s how you can save money when you buy an engagement ring

Making the decision to ask someone to marry you is the big one. After that, once you know it’s right, it makes sense to get the best ring you can to pop the question, and that could include value for money. Value doesn’t mean cheap, and with a bit of research, you could save yourself some outlay that could go towards the wedding itself.

A diamond engagement ring is the traditional option, though there is so much variation. Look into the ‘4 Cs’ and get the ring you want.
Cut

How the stone is cut will have a huge effect on how it sparkles, so choosing a clever cut could save some pounds. Advice is to choose the best cut you can afford, with industry ranking from excellent to poor. Some retailers also add in their own ‘signature’ cut, although those can be harder to evaluate to an untrained eye and might have a brand name premium.

engagementColour

You might think diamonds are all the same ‘colourless’ colour, but in fact, they range from a D (true ‘colourless,’ rare, and consequently costly) through to Z. Most people wouldn’t be able to tell the difference between a D and an H, so if cash is tight, look for a G-H.

Clarity

All diamonds come with a rating from FL – meaning flawless – through to ‘inclusions’ which are visible. Opting for a diamond graded SI1 or SI2 will ensure you have a beautiful stone whose ‘flaws’ are not visible without a magnifying glass and then likely only to experts.

Carat

Many people will buy stones at full numbers, e.g. 1 carat, though buying just under a whole or common fraction will see a cost saving with little impact on visible quality. This is known as ‘buying shy.’

For more suggestions for how to choose the perfect diamond engagement ring, see the tips from Marie Claire. Once you have your budget set, and you’re armed with the top tips, start your research with specialist jewellers like Compare The Diamond https://www.comparethediamond.com/diamond-engagement-rings. Online retailers are often able to offer a bigger discount.

The key is not to feel pressure. It is an important decision because it’s meant to be forever, so take your time and think rather than rush and get it wrong.

How to Pack Clothing for Your Courier Delivery

It’s easy to send clothes by courier if you know how to pack them correctly. If you’re returning items, sending clothes to family or friends or posting an item you sold on eBay, then this guide will give you the information you need.There are many advantages of using a courier service. Here’s how to pack your clothing.

Fold Your Clothes

Start by folding the clothes neatly and try to get them as flat as possible. This way you’ll be able to fit them into a box or bag. To avoid creases in the clothes, use tissue paper and secure belts and zips.

Bags or Boxes?

You can choose between packing your clothes into a bag or box. If you’re sending baby clothes or a single item, then a bag is sufficient. Jiffy bags are easy to find and come in a range of sizes. Make sure if you use your own bag it isn’t overfilled, as it will break.

Boxes should be used for heavier and larger items. Make sure the box you choose is strong and don’t underestimate how heavy the clothes will be. If you’re using a box, then wrap the clothes in bubble wrap or other protective materials to protect them from potential water damage.

The Cost

Costs vary depending on the service you use, but each service will quote you on the price to send your package. There are lots of couriers to choose from, but make sure you find a reputable company with reasonable prices. One same day courier in Slough is https://www.uk-tdl.com/same-day-courier-slough.html.

Things to Remember

When you’re weighing your package, make sure it’s fully packed with any protective materials included. If it’s heavier than the courier company expected, they might charge you extra.

Use a marker pen to write the address clearly. If the courier can’t understand your writing, then it may get delivered to the wrong address.

When sealing your parcel use strong tape to ensure it remains secure. Make sure you put tape around the edges to the parcel to keep the corners strong. Don’t use sellotape, because it won’t keep your items secure.

If the box has been used before, remove all addresses and labels so the courier can locate the address.